SPDCONF=NORMAL
HOST Control B
RESUME | Send USB Resume |
SPDCONF | Speed Configuration for Host 0 (NORMAL): Normal mode: the host starts in full-speed mode and performs a high-speed reset to switch to the high speed mode if the downstream peripheral is high-speed capable. 3 (FS): Full-speed: the host remains in full-speed mode whatever is the peripheral speed capability. Relevant in UTMI mode only. |
TSTJ | Test mode J |
TSTK | Test mode K |
SOFE | Start of Frame Generation Enable |
BUSRESET | Send USB Reset |
VBUSOK | VBUS is OK |
L1RESUME | Send L1 Resume |